200kN Digital Multi-Test Frame 

with servo-controlled Load 

or Displacement Strain

for compression, flexural and tensile testing of Asphalt, Steel, Concrete, Cement, Wood, Plastic etc. with appropriate accessories

Electromechanical 200kN frame with touch screen control.

• Compression Testing
• Flexural Testing
• Tensile Testing

For testing civil engineering and construction materials with a servo-controlled system for Load or Displacement/Strain.

Suitable for testing:

Roads (Marshall, Duriez, CBR etc.), Steel, Concrete, Cement, Wood, Plastic, etc.

The SL501 consists of a sturdy two column base unit containing the transmission components and hardware control instruments. The two columns are manufactured from high resistance steel with ground hard chrome surfacing.

The height of the upper crosshead can be adjusted to hold accessories necessary to perform specific tests.

The lower mobile crosshead is operated by a recirculating ball screw and rotating lead. The servo-controlled motor ensures the correct application of load and constant speed.

The load is applied by a mechanical jack activated by a microprocessor controlled brushless closed-loop motor with optical encoder.

Both crossheads have couplings to fix a range of compatible test devices.

Stress is measured by a load cell; the measurement and displacement control of the crosshead is achieved by using the integral touch screen control.

Electric limit switches on the upper mobile crosshead are provided prevent accidental damage.

Firmware:

• The SL501 is complete with touch screen control with colour display. This runs on the Windows operating system for management and analysis of the data, test results and graphs.
• The touch screen control uses an icon based interface for easy set up of parameters and immediate performance of tests.
• The SL501can be connected to a PC for remote